Yishen Print
English
Request a quote

Which binding for how many pages: saddle stitch, wire-o, sewn or perfect binding

The four common bindings for catalogs, brochures and booklets, the page range each one suits, and how to choose when more than one would work.

Yishen Print, Shanghai. Published

Short answer

Choose the binding by page count. Saddle stitch suits 8 to 40 pages. Perfect binding suits 40 pages and up. Sewn binding (thread-sewn, then glued) suits 28 pages and up when the book must open flat and survive heavy use. Wire-o suits 12 pages and up when readers need to fold pages all the way back. Between 28 and 40 pages several bindings work, so choose by how the booklet will be used.

These are the page ranges we recommend to clients at our factory in Shanghai. You will find other numbers online: some say saddle stitch tops out at 32 pages, others say 48 or 64. Most of that disagreement comes from people counting different things. Some count sheets of paper, some count printed sides. So start by counting pages the way a printer does.

Count pages, not sheets

In print, one page is one printed side. A sheet printed on both sides is 2 pages. Fold that sheet in half and it becomes 4 pages. A 16-page booklet is 4 sheets folded and nested together, and a 40-page booklet is 10 sheets. Design, printing and binding are all quoted in pages, so everyone should use the same number.

A saddle-stitched booklet must have a page count that is a multiple of 4, cover included. It is made of folded sheets stapled through the fold, so a single extra side cannot exist.

When you ask for a quote, say whether the count includes the cover. "40 pages plus cover" and "40 pages total" are two different booklets.

The four bindings and their page ranges

Recommended page ranges: saddle stitch 8 to 40, wire-o from 12, sewn from 28, perfect binding from 40. Between 28 and 40 pages the ranges overlap. Saddle stitch Wire-o Sewn binding Perfect binding 8122840 more pages 28 to 40: choose by use
Recommended page ranges, counted in pages with the cover included.
BindingPagesOpens flatPrintable spineTypical use
Saddle stitch8 to 40YesNoEvent handouts, short catalogs, menus
Wire-o12 and upYes, folds back 360°NoManuals, price books, training material, calendars
Sewn binding28 and upYesYesCatalogs and look books kept on a shelf
Perfect binding40 and upNoYesStandard catalogs and company brochures

Saddle stitch costs least and ships fastest, and it opens completely flat. Under 8 pages there is not enough to make a booklet. Over 40 pages it starts to cause problems, explained in the next section.

Wire-o is punched and bound with a double wire loop, so pages fold back a full 360°. With very few pages, punching and wiring is not worth it.

Sewn binding stitches each folded section together with thread before the cover is glued on. With too few pages there are not enough sections for the sewing to make a difference.

Perfect binding mills the spine flat and glues the cover on, so the result looks like a paperback with printing on the spine. Below 40 pages the spine is too thin for the glue to hold well.

Why a saddle-stitched booklet cannot get too thick

Cross-section of a saddle-stitched booklet. The inner sheets push out further than the outer sheets, so when the edge is trimmed straight, inner pages lose more paper. Staples Outer sheet Trim line Inner sheetsstick out
Creep: inner sheets stick out past the outer ones, so trimming takes more off the middle pages.

A saddle-stitched booklet is a stack of folded sheets, one inside the next. Paper has thickness, so the more sheets you nest, the further the innermost sheets push out at the open edge.

After binding, the three open edges are trimmed straight. The outer sheets are trimmed just right, but the middle sheets stick out, so more is cut off them. Text or page numbers placed close to the outside edge will sit closer to the trim on the middle pages than on the first and last pages.

This is called creep. On thin booklets you barely see it. It grows with every sheet you add, and the fold also gets so thick that the staples cannot hold it closed, so the booklet bulges.

So the real limit of saddle stitch is thickness, not a page number. Forty pages on thin text paper behave very differently from forty pages on heavy coated stock. With thick paper, lower the page count or move to perfect binding.

Between 28 and 40 pages, choose by use

  • Handed out at trade shows and events: saddle stitch. Low cost, fast, and it opens flat in the hand.
  • Kept on a client's shelf with your name on the spine: sewn binding. Saddle stitch has no spine, and we don't recommend perfect binding under 40 pages, so sewn is the only option in this range with a printable spine.
  • Lots of photos across a two-page spread: saddle stitch or sewn binding. Both open flat, so the middle of the image does not disappear into the spine. Perfect binding does not open flat, and the center of a spread sinks into the gutter.
  • Pages need to fold all the way back: wire-o. Product manuals, price books and training material use it because any page can lie flat on a desk.

Perfect binding vs sewn binding

From the outside they look the same: both look like a book. The difference is inside the spine.

Perfect binding relies on glue alone. The spine is milled flat and roughened, then glued to the cover. It costs less and ships faster, and it is the most common choice for standard catalogs. The downside: open it to the middle and it closes by itself, and thick books on heavy paper can shed pages after a lot of use.

Sewn binding sews first, then glues. Each folded section is stitched with thread, then glued and covered. The middle pages open flat, pages do not fall out, and it survives repeated use. It costs somewhat more than perfect binding.

A quick test with any sample: open it to the center page and let go. If it stays open, it is sewn. If it closes, it is almost always perfect bound.

If the catalog is meant to stay with clients for a long time, or the inside pages are heavy coated paper, we suggest sewn binding.

When the page count is not a multiple of 4

The most common case: the layout comes out at 50 pages, which saddle stitch cannot do. There are two fixes. Cut to 48 pages by merging a few layouts and tightening the text, or add up to 52 pages with two pages of real content.

Added pages should not be blank. Good uses are a contents page, company credentials and how ordering works, contact details with a QR code, or a lined notes page.

Better still, decide the binding before design starts. Saddle stitch needs a page count in multiples of 4. Perfect and sewn binding need extra space on the inner margin, where the spine takes some of the page. Changing the binding after layout often means reworking the whole book.

Choose the binding in three steps

  1. Count the total pages and say whether the cover is included. For saddle stitch the total, cover included, must be a multiple of 4.
  2. Under 40 pages, start with saddle stitch. Over 40, start with perfect binding. Between 28 and 40, choose by use.
  3. If it must open flat and take heavy use, choose sewn. If pages must fold back, choose wire-o.

Binding is the last step in production, but it has to be decided before design begins: page count, paper and layout all follow from it.

Products this guide covers

More guides