Yishen Print
English
Request a quote

Why printed colors look different from your screen

Where the difference between screen and print comes from, what paper and lighting do to color, how to specify brand colors, and the five checks that keep a print run on color.

Yishen Print, Shanghai. Published

Short answer

Printed colors differ from your screen because a screen emits light and mixes red, green and blue (RGB), while print reflects light off paper through four inks: cyan, magenta, yellow and black (CMYK). Ink on paper can reproduce fewer colors than a screen can show, and the paper, your monitor and the light you look under widen the gap. To control it: design in CMYK, give brand colors as Pantone numbers, and approve a printed proof before the run. The signed proof, not the screen, is the standard the finished job is checked against.

An exact match with your screen is not possible. What is possible is catching almost every "this doesn't look right" before the press starts. This guide covers where the difference comes from and the five things that keep colors under control.

A screen emits light, paper reflects it

Left: red, green and blue light overlap on a black screen and add up to white. Right: cyan, magenta and yellow inks overlap on white paper and absorb light toward dark. Screen: light adds up (RGB) Paper: inks absorb light (CMYK)
Illustration only. Your screen can only show RGB, so the right-hand panel is a simulation of ink.

A screen builds color from red, green and blue light. It is bright and can show very saturated colors. Print lays cyan, magenta, yellow and black ink on paper, and you see the color in the light the paper reflects back.

The range of colors ink can print is smaller than the range a screen can show. Some screen colors simply cannot be printed, and converting to CMYK picks the closest printable color instead.

The colors that shift most are bright, saturated ones: neon green, vivid purple and pure red. After conversion they look noticeably duller and darker. If your design depends on them, expect the change.

That is why files should be set up in CMYK from the start. If you design in RGB and let the printer convert, the printed colors will be ones the designer never saw.

The same color looks different on different paper

PaperWhat it does to color
Gloss coatedThick, smooth coating keeps ink on the surface. The brightest, most saturated result.
Matte coatedThe surface is treated to cut shine, so colors look softer and less punchy.
Uncoated and specialty paperInk soaks into the fibers, so colors look deeper and softer.

The same file on a different paper gives a different color. So the proof should be printed on the paper the job will run on. If the paper changes partway through, print a new proof.

Screens and lighting change what you see

  • Monitors: an uncalibrated monitor shows color its own way. The designer's screen, the brand manager's screen and the printer's screen are not showing the same color.
  • Phones: phone screens are brighter and more saturated still. A phone is the least reliable way to approve print color.
  • Lighting: under warm indoor light, a proof looks yellower. Check proofs in daylight where possible.
  • Paper white: paper is not pure white, and its tone affects light colors and large white areas.

So color cannot be approved by "have a look at it on screen".

Brand colors: send the Pantone number, not a screenshot

If your company has defined brand colors, for example Pantone references, put the numbers in the order. Don't send a screenshot of the logo and ask the printer to match it by eye.

A brand color can be printed two ways. A spot color is a separate ink mixed to that one color: stable and closest to the swatch book. A CMYK build mixes the color from the four process inks: close, but rarely exact.

If the brand color is strict, print it as a spot color. Spot colors need offset printing; digital presses cannot print them. Our guide to offset vs digital printing covers that choice.

The signed proof is the standard, not the screen

A printed proof before the run is the single most effective color control. A digital proof is fast and low cost, good for checking layout and overall color. A press proof printed with the real inks is closer to the final result; choose it when brand color is strict.

Raise any color concerns at the proof stage, where changes cost least. Once you sign the proof, it becomes the standard the delivered job is checked against. When the goods arrive, compare them with the signed proof, not with your screen.

Two more things to know. Copies within one run vary slightly: paper absorbs ink unevenly, and ink density changes a little across a sheet. That is normal for offset printing; what matters is that the variation stays within what the proof showed. And a reprint can differ from the first run, so print enough in one go.

Five things to agree with your printer

  1. Send files in CMYK. Don't hand over RGB files to be converted.
  2. Give brand colors as Pantone numbers, written into the order, not described or screenshotted.
  3. Say which color matters most. Colors on one press sheet affect each other, so the press operator has to prioritize. Tell them whether the logo, the product photos or a large background color comes first.
  4. Check proofs in daylight, not under warm lamps and not against a phone.
  5. Keep a copy of the signed proof and compare the delivery against it.

Common questions

Should my print file be RGB or CMYK?

CMYK. RGB is for screens. Set the document to CMYK when design starts.

Why does the same file print differently at different printers?

Presses, inks, papers and the way each pressroom adjusts ink all differ. For two runs to match, use the same printer and the same paper, and give them the previous signed proof to match.

Can print match my screen exactly?

No. It can match the signed proof closely.

What should I watch with large dark backgrounds?

Print large black areas as rich black, built from all four inks, or they look gray. Small text and thin lines are the opposite: use black ink only, or a slight misregistration shows colored edges.

Products this guide covers

More guides